SIPSAK

Back To MAN Pages From BackTrack 5 R1 Master List  

NAME

SYNOPSIS

DESCRIPTION

- default mode

A SIP message is sent to destination in sip-uri and reply status is displayed. The request is either taken from filename or generated as a new OPTIONS message.

- traceroute mode (-T)

This mode is useful for learning request's path. It operates similarly to IP-layer utility traceroute(8).

- message mode (-M)

Sends a short message (similar to SMS from the mobile phones) to a given target. With the option -B the content of the MESSAGE can be set. Usefull might be the options -c and -O in this mode.

- usrloc mode (-U)

Stress mode for SIP registrar. sipsak keeps registering to a SIP server at high pace. Additionaly the registrar can be stressed with the -I or the -M option. If -I and -M are omitted sipsak can be used to register any given contact (with the -C option) for an account at a registrar and to query the current bindings for an account at a registrar.

- randtrash mode (-R)

Parser torture mode. sipsak keeps sending randomly corrupted messages to torture a SIP server's parser.

- flood mode (-F)

Stress mode for SIP servers. sipsak keeps sending requests to a SIP server at high pace.

If libruli (http://www.nongnu.org/ruli/) support is compiled into the sipsak binary, then first a SRV lookup for _sip._udp.hostname is made. And if this lookup fails a normal A lookup is made. If a port was given in the target URI the SRV lookup is omitted. Failover, load distribution and other transports are not supported yet.

OPTIONS

-a, --password PASSWORD

With the given PASSWORD an authentication will be tryed on received '401 Unauthorized'. Authorization will be tryed on time. If this option is omitted an authorization with an empty password ("") will be tryed. If the password is equal to - the password will be read from the standard input (e.g. the keyboard). This prevents other users on the same host from seeing the password the password in the process list. NOTE: the password still can be read from the memory if other users have access to it.

-A, --timing

prints only the timing values of the test run if verbosity is zero because no -v was given. If one or more -v were given this option will be ignored.

-b, --apendix-begin NUMBER

The starting number which is appended to the user name in the usrloc mode. This NUMBER is increased until it reaches the value given by the -e parameter. If omitted the starting number will be one.

-B, --message-body STRING

The given STRING will be used as the body for outgoing MESSAGE requests.

-c, --from SIPURI

The given SIPURI will be used in the From header if sipsak runs in the message mode (initiated with the -M option). This is helpfull to present the receiver of a MESSAGE a meaningfull and usable address to where maybe even responses can be send.

-C, --contact SIPURI

This is the content of the Contact header in the usrloc mode. This allows to insert forwards like for mail. For example you can insert the uri of your first SIP account at a second account, thus all calls to the second account will be forwarded to the first account. As the argument to this option will not be enclosed in brackets you can give also multiple contacts in the raw format as comma seperated list. The special words empty or none will result in no contact header in the REGISTER request and thus the server should answer with the current bindings for the account at the registrar.

-d, --ignore-redirects

If this option is set all redirects will be ignored. By default without this option received redirects will be respected. This option is automaticly activated in the randtrash mode and in the flood mode.

-D, --timeout-factor NUMBER

The SIP_T1 timer is getting multiplied with the given NUMBER. After receiving a provisional response for an INVITE request, or when a reliable transport like TCP or TLS is used sipsak waits for the resulting amount of time for a final response until it gives up.

-e, --appendix-end NUMBER

The ending number which is appended to the user name in the usrloc mode. This number is increased until it reaches this ending number. In the flood mode this is the maximum number of messages which will be send. If omitted the default value is 2^31 (2147483647) in the flood mode.

-E, --transport STRING

The value of STRING will be used as IP transport for sending and receiving requests and responses. This option overwrites any result from the URI evaluation and SRV lookup. Currently only 'udp' and 'tcp' are accepted as value for STRING.

-f, --filename FILE

The content of FILE will be read in in binary mode and will be used as replacement for the alternatively created sip message. This can used in the default mode to make other requests than OPTIONS requests (e.g. INVITE). By default missing carriage returns in front of line feeds will be inserted (use -L to de-activate this function). If the filename is equal to - the file is read from standard input, e.g. from the keyboard or a pipe. Please note that the manipulation functions (e.g. inserting Via header) are only tested with RFC conform requests. Additionaly special strings within the file can be replaced with some local or given values (see -g and -G for details).

-F, --flood-mode

This options activates the flood mode. In this mode OPTIONS requests with increasing CSeq numbers are sent to the server. Replies are ignored -- source port 9 (discard) of localhost is advertised in topmost Via.

-h, --help

Prints out a simple usage help message. If the long option --help is available it will print out a help message with the available long options.

-g, --replace-string STRING

Activates the replacement of $replace$ within the request (usualy read in from a file) with the STRING. Alternatively you can also specify a list of attribute and values. This list has to start and end with a non alpha-numeric character. The same character has to be used also as seperator between the attribute and the value and between new further attribute value pairs. The string "$attribute$" will be replaced with the value string in the message.

-G, --replace

Activates the automatic replacement of the following variables in the request (usualy read in from a file): $dsthost$ will be replaced by with the host or domainname which is given by the -s parameter. $srchost$ will be replaced by the hostname of the local machine. $port$ will be replaced by the local listening port of sipsak. $user$ will be replaced by the username which is given by the -s parameter.

-H, --hostname HOSTNAME

Overwrites the automatic detection of the hostname with the given parameter. Warning: use this with caution (preferable only if the automatic detection fails).

-i, --no-via

Deactivates the insertion of the Via line of the localhost. Warning: this probably disables the receiving of the responses from the server.

-I, --invite-mode

Activates the Invites cycles within the usrloc mode. It should be combined with -U. In this combination sipsak first registeres a user, and then simulates an invitation to this user. First an Invite is sent, this is replied with 200 OK and finaly an ACK is sent. This option can also be used without -U , but you should be sure to NOT invite real UAs with this option. In the case of a missing -U the -l PORT is required because only if you made a -U run with a fixed local port before, a run with -I and the same fixed local port can be successful. Warning: sipsak is no real UA and invitations to real UAs can result in unexpected behaivior.

-j, --headers STRING

The string will be added as one or more additional headers to the request. The string "\n" (note: two characters) will be replaced with CRLF and thus result in two seperate headers. That way more then one header can be added.

-l, --local-port PORT

The receiving UDP socket will use the local network port. Useful if a file is given by -f which contains a correct Via line. Check the -S option for details how sipsak sends and receives messages.

-L, --no-crlf

De-activates the insertion of carriage returns (\r) before all line feeds (\n) (which is not allready proceeded by carraige return) if the input is comming from a file ( -f ). Without this option also an empty line will be appended to the request if required.

-m, --max-forwards NUMBER

This sets the value of the Max-Forward header field. If omitted no Max-Forward field will be inserted. If omitted in the traceroute mode number will be 255.

-M, --message-mode

This activates the Messages cycles within the usrloc mode (known from sipsak versions pre 0.8.0 within the normal usrloc test). This option should be combined with -U so that a succesful registration will be tested with a test message to the user and replied with 200 OK. But this option can also be used without the -U option. Warning: using without -U can cause unexpected behaivor.

-n, --numeric

Instead of the full qualified domain name in the Via line the IP of the local host will be used. This option is now on by default.

-N, --nagios-code

Use Nagios comliant return codes instead of the normal sipsak ones. This means sipsak will return 0 if everything was ok and 2 in case of any error (local or remote).

-o, --sleep NUMBER

sipsak will sleep for NUMBER ms before it starts the next cycle in the usrloc mode. This will slow down the whole test process to be more realistic. Each cycle will be still completed as fast as possible, but the whole test will be slowed down.

-O, --disposition STRING

The given STRING will be used as the content for the Content-Disposition header. Without this option there will be no Content-Disposition header in the request.

-p, --outbound-proxy HOSTNAME[:PORT]

the address of the hostname is the target where the request will be sent to (outgoing proxy). Use this if the destination host is different then the host part of the request uri. The hostname is resolved via DNS SRV if supported (see description for SRV resolving) and no port is given.

-P, --processes NUMBER

Start NUMBER of processes in parallel to do the send and reply checking. Makes only sence if a higher number for -e is given in the usrloc, message or invite mode.

-q, --search REGEXP

match replies against REGEXP and return false if no match occured. Useful for example to detect server name in Server header field.

-r, --remote-port PORT

Instead of the default sip port 5060 the PORT will be used. Alternatively the remote port can be given within the sip uri of the -s parameter.

-R, --random-mode

This activates the randtrash mode. In this mode OPTIONS requests will be send to server with increasing numbers of randomly crashed characters within this request. The position within the request and the replacing character are randomly chosen. Any other response than Bad request (4xx) will stop this mode. Also three unresponded sends will stop this mode. With the -t parameter the maximum of trashed characters can be given.

-s, --sip-uri SIPURI

This mandatory option sets the destination of the request. It depends on the mode if only the server name or also an user name is mandatory. Example for a full SIPURI : sip:test@foo.bar:123 See the note in the description part about SRV lookups for details how the hostname of this URI is converted into an IP and port.

-S, --symmetric

With this option sipsak will use only one port for sending and receiving messages. With this option the local port for sending will be the value from the -l option. In the default mode sipsak sends from a random port and listens on the given port from the -l option. Note: With this option sipsak will not be able to receive replies from servers with asymmetric signaling (and broken rport implementation) like the Cisco proxy. If you run sipsak as root and with raw socket support (check the output from the -V option) then this option is not required because in this case sipsak already uses only one port for sending and receiving messages.

-t, --trash-chars NUMBER

This parameter specifies the maximum of trashed characters in the randtrash mode. If omitted NUMBER will be set to the length of the request.

-T, --traceroute-mode

This activates the traceroute mode. This mode works like the well known traceroute(8) command expect that not the number of network hops are counted rather the number of server on the way to the destination user. Also the round trip time of each request is printed out, but due to a limitation within the sip protocol the identity (IP or name) can only determined and printed out if the response from the server contains a warning header field. In this mode on each outgoing request the value of the Max-Forwards header field is increased, starting with one. The maximum of the Max-Forwards header will 255 if no other value is given by the -m parameter. Any other response than 483 or 1xx are treated as a final response and will terminate this mode.

-u, --auth-username STRING

Use the given STRING as username value for the authentication (different account and authentication username).

-U, --usrloc-mode

This activates the usrloc mode. Without the -I or the -M option, this only registers users at a registrar. With one of the above options the previous registered user will also be probed ether with a simulated call flow (invite, 200, ack) or with an instant message (message, 200). One password for all users accounts within the usrloc test can be given with the -a option. An user name is mandatory for this mode in the -s parameter. The number starting from the -b parameter to the -e parameter is appended the user name. If the -b and the -e parameter are omitted, only one runs with the given username, but without append number to the usernames is done.

-v, --verbose

This parameter increases the output verbosity. No -v means nearly no output except in traceroute and error messages. The maximum of three v's prints out the content of all packets received and sent.

-V, --version

Prints out the name and version number of sipsak and the options which were compiled into the binary.

-w, --extract-ip

Activates the extraction of the IP or hostname from the Warning header field.

-W, --nagios-warn NUMBER

Return Nagios warn exit code (1) if the number of retransmissions before success was above the given number.

-x, --expires NUMBER

Sets the value of the Expires header to the given number.

-z, --remove-bindings

Activates the randomly removing of old bindings in the usrloc mode. How many per cent of the bindings will be removed, is determined by the USRLOC_REMOVE_PERCENT define within the code (set it before compilation). Multiple removing of bindings is possible, and cannot be prevented.

RETURN VALUES

If the -N option was given the return code will be 2 in case of any (local or remote) error. 1 in case there have been retransmissions from sipsak to the server. And 0 if there was no error at all.  

CAUTION

EXAMPLES

sipsak -vv -s sip:nobody@foo.bar

displays received replies.

sipsak -T -s sip:nobody@foo.bar

traces SIP path to nobody.

sipsak -U -C sip:me@home -x 3600 -a password -s sip:myself@company

inserts forwarding from work to home for one hour.

sipsak -f bye.sip -g '!FTAG!345.af23!TTAG!1208.12!' -s sip:myproxy

reads the file bye.sip, replaces $FTAG$ with 345.af23 and $TTAG$ with 1208.12 and finally send this message to myproxy

LIMITATIONS / NOT IMPLEMENTED

IPv6 is not supported.

Missing support for the Record-Route and Route header.

BUGS

AUTHOR

SEE ALSO

Index

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

RETURN VALUES

CAUTION

EXAMPLES

LIMITATIONS / NOT IMPLEMENTED

BUGS

AUTHOR

SEE ALSO