Manual Page - dmitry(1)
Manual Reference Pages - DMitry (1)
NAME
DMitry - Deepmagic Information Gathering Tool
CONTENTS
Synopsis
Description
Options
Examples
Bugs
Distribution
Author
SYNOPSIS
dmitry [Options] host
DESCRIPTION
DMitry (Deepmagic Information Gathering Tool) is a UNIX/(GNU)Linux Command
Line program coded purely in C with the ability to gather as much information
as possible about a host.
DMitry has a base functionality with the ability to add new functions.
Basic functionality of DMitry allows for information to be gathered about a
target host from a simple whois lookup on the target to UpTime reports and TCP portscans.
The application is considered a tool to assist in information gathering when
information is required quickly by removing the need to enter multiple commands
and the timely process of searching through data from multiple sources.
To get straight into DMitry without reading this document, you can initially
type "dmitry target", this will perform the majority of functions on the target.
OPTIONS
Options should be passed to DMitry in the form of ’-option’.
Only options known by DMitry will be used and others will be ignored.
If options are not passed as a group block, the trailing options will be considered a host target.
|
|
|
-o filename |
| |
Create an ascii text output of the results to the "filename" specified. If no output filename is specified
then output will be saved to "target.txt". If this option is not specified in any form output will be sent to
the standard output (STDOUT) by default. This option MUST trail all other options, i.e. "./dmitry -winseo target".
|
|
-i |
Perform an Internet Number whois lookup on the target. This requires that the target be in the form of a 4 part Internet Number
with each octal seperated using the ‘.’ notation. For example, "./dmitry -i 255.255.255.255".
|
|
-w |
Perform a whois lookup on the ’host’ target. This requires that the target be in a named character format.
For example, "./dmitry -w target" will perform a standard named whois lookup.
|
|
-n |
Retrieve netcraft.com data concerning the host, this includes Operating System, Web Server release and UpTime information
where available.
|
|
-s |
Perform a SubDomain search on the specified target. This will use serveral search engines to attempt to locate sub-domains
in the form of sub.target. There is no set limit to the level of sub-domain that can be located, however, there is a maximum
string length of 40 characters (NCOL 40) to limit memory usage. Possible subdomains are then reversed to an IP address, if
this comes back positive then the resulting subdomain is listed. However, if the host uses an asterisk in their DNS records
all resolve subdomains will come back positive.
|
|
-e |
Perform an EmailAddress search on the specified target. This modules works using the same concept as the SubDomain search by
attempting to locate possible e-mail addresses for a target host. The e-mail addresses may also be for possible sub-domains of
the target host. There is a limit to the length of the e-mail address set to 50 characters (NCOL 50) to limit memory usage.
|
|
-p |
Perform a TCP Portscan on the host target. This is a pretty basic module at the moment, and we do advise users to use something
like nmap (www.insecure.org/nmap/) instead. This module will list open, closed and filtered ports within a specific range.
There will probably be little advancement upon this module, though there will be some alterations to make it a little more user
friendly. There are also other options for this module that can affect the scan and its relative output.
|
|
-f |
This option will cause the TCP Portscan module to report/display output of filtered ports. These are usually ports that have been
filtered and/or closed by a firewall at the specified host/target. This option requires that the ’-p’ option be passed as a previous option.
For example, "./dmitry -pf target".
|
|
-b |
This option will cause the TCP Portscan module to output Banners if they are received when scanning TCP Ports. This option requres
that the ’-p’ option be passed as a previous option. For example, "./dmitry -pb target".
|
|
-t |
This sets the Time To Live (TTL) of the Portscan module when scanning individual ports. This is set to 2 seconds by default.
This is usually required when scanning a host that has a firewall and/or has filtered ports which can slow a scan down.
|
|
EXAMPLES
This section presents some example queries that can be made using dmitry. The hosts and targets used in the examples
are merely used for demonstration.
dmitry -w example-host.com
This will perform a named whois (INIC-WHOIS) lookup on the target host, displaying results to the standard output (STDOUT).
dmitry -winsepo sometextfile.txt example-host.com
This will perform all the basic functions on the target host and store all the output into "sometextfile.txt".
dmitry -winsepo example-host.com
This will perform all the basic functions on the target host and store all the output into "example-host.com.txt".
dmitry -winsepfbo 127.0.0.1
This will perform all the basic functions on the target host and store all the output into "127.0.0.1.txt". This
will also display banners and show filtered ports.
BUGS
Bugs? if you find any e-mail me at james@mor-pah.net with information your OS, what caused the problem, the error, suggestions etc.
Thanx
DISTRIBUTION
DMitry, Deepmagic Information Gathering Tool is Copyright (C) 2001 - 2005 by James Greig.
Source code is provided with this software to allow users and developers to understand the software for security auditing purposes.
We allow users to view the source code so that they are able to port the software to different Operating Systems with the ability to locate bugs and so forth.
AUTHOR
Programmer/Creator
James Greig - James@mor-pah.net - http://www.mor-pah.net
Conceptual Design
Phased - http://www.deepmagic.org.uk
Top of page |
| 1.3a | DMitry (1) | March 2006 |
Generated by manServer 1.07 from /usr/local/man/man1/dmitry.1 using man macros.
Printable version of this article
